Heat Press DR3

double air heat press DR-3

 

 

General Description

The double air heat press DR-3 with dimensions 50*40cm is an easy to use press for flat surfaces (ready-made clothes, t-shirts), which will fully compensate you with its quality of pressing and lifespan. It is a flexible, air press with two heating stations that allows the operator to triple their productivity, since while the first heating station presses, the operator can take advantage of this time to lay the next garment.
The time and temperature of resistance are controlled through a digital controller, while the following are also offered:
•    Measurement of the daily production
•    Measurement of the total production of the press during its lifespan
•    Selection of different pressing times for each heating station if the operator presses different designs or garments on each heating station.
•    And, finally two operating options are offered, a semi-automatic and a fully automatic one:
o    Semi-automatic: the operator can move the head of the press to the right or to the left by pressing the respective buttons on the head of the machine
o    Fully Automatic the head of the press moves to the right or to the left automatically, after a specific time set by the operator.
     
The application pressure of the press increases and decreases based on the operator's requirements with the use of a pressure regulator (pressure gauge) which is situated at a prominent spot on the press. Our company guarantees the proper allocation of pressure and heat on the whole surface of the platen.

The double air heat multi-press DR-3 is an exceptional choice for large production companies which print on surfaces of a size of up to 50x40cm max.

The double heat press DR-3 is fully manufactured in our facilities by experienced mechanics and technicians, who place emphasis on the quality of production and take under consideration the hygiene and employee safety requirements as well as the environmental protection requirements as these are set forth by the Council of the European Communities and by the Greek legislation (CE) (PD 377). This declaration becomes invalid if any changes occur to the press without our authorization.


 

Compliance with EC Directives:

•    EC Machinery Directive (89/392/EEC) along with its amendments 91/368/EEC, 93/44/EEC and 93/68/EEC
•    EC Directive of Electromagnetic Compatibility (89/336/EEC) along with its amendment 92/31/EEC
•    EC Low Voltage Directive (73/23/EEC)

Compliance with international standards:

•    EN 292.01-92, EN 292.02-92, EN 294-92, EN 349-93, EN 23741-92, EN 23742-92, EN 60204.01-93

Compliance with national standards:

•    ELOT 509-88

Technical specifications

Double air heat press: 50x40cm

• Digital controller for the measurement of time
   and temperature

    • Temperature between 0o-240o C for each heating station.
    • Two independent times between 0-999 sec for each heating station.

• Meter of the daily production output

• Meter of the total production output of
   the press during its lifespan.

 

• Temperature fluctuation on the surface:   +/-2ο C

• Maximum power of the heated surface:   2200W  

• Power supply:   230V AC, 50Hz, 6A

• Air pressure:   6 bar

• Operators:   1

• CE

• Dimensions:   108x85x69cm

• Net weight:   180Kg

 
 

Warranty

The double air heat multi press DR-3 has a 12-month warranty, which is in effect from the date of purchase of the machine. The press DR-3 is accompanied by a manual, it’s wiring diagrams and list of the spare parts of the machine. 
Our company guarantees the proper function of the press and at the same time is obliged to service or repair any faulty part, which shows a manufacturing defect within the period of the 12-month warranty. The repair and spare parts costs burden the manufacturer. The transportation cost from and to our company's seat, the insurance premiums and any other expenses, which may arise during the transportation of the product always burden the buyer.

This warranty will no longer be valid if:

•    The machine was used for a different purpose than the one it is intended for.
•    Damages were caused due to an accident, a fall, or due to the improper handling of the machine.
•    A repair attempt by the user or by a third party preceded.
•    An accessory or a spare part of the machine was modified for any reason.
•    The installation, use and maintenance of the machine was not carried out in accordance with the instructions of this manual.
•    A consumable or a spare part used is different than the ones that were originally included in the machine.


 

 

HEAD OFFICE
174 K. Karamanlis avenue,
Postcode. GR-54248
Thessaloniki, Greece
t. +30 2310 311777
f. +30 2310 322784
This email address is being protected from spambots. You need JavaScript enabled to view it.

FACTORY
4th road Industrial Park,
Lakkoma, Chalkidiki
Postcode. GR-63080
t. +34 2399051432
f. +34 2399051433 
This email address is being protected from spambots. You need JavaScript enabled to view it.

Follow us on social media

Ask a question
1000 characters left