Heat Press M2A

Double air heat multi-press M2-A

 

General Description

The double air heat multi-press M2-A prints on ready-made clothes, caps and on other flat surfaces, as for instance wood, tiles etc. It is a flexible, air multi-press with two heating stations that allows the operator to quickly switch printings platens and to triple their productivity as while the first heating station presses, the operator can take advantage of this time to prepare the pressing of the item on the other station.
The platens that can be used in the double air heat multi-press M2-A are the following:
• Α-15 for small flat surfaces with dimensions 15x15cm.
• Α-Α4 for flat surfaces of a size of ISO Α4 or 30x21cm.
(Horizontal or vertical layout)
• Α-C for caps
The time and temperature of resistance are controlled through a digital controller, while the following are also offered:
Measurement of the daily production.
Measurement of the total production of the multi-press during its lifespan
Selection of different pressing times for each heating station (bottom plates), in case the operator presses different designs or garments on each station.
And, finally two selections are offered: a semi-automatic and a fully automatic multi-press:
Semi-automatic: the operator can move the head of the press to the right or to the left by pressing the respective buttons on the head of the machine
Fully Automatic the head of the press moves to the right or to the left automatically, after a specific time, which is set by the operator.

The application pressure of the press increases and decreases depending on the operator's requirements with the use of a pressure regulator (pressure gauge) that is situated at a prominent spot on the press. Our company guarantees the proper allocation of pressure and heat on the whole surface of the platen.
The double air heat multi-press M2-A is an exceptional choice for companies with medium to large scale production which print on small surfaces of a size of up to 30x21cm max.

The double air heat multi-press M2-A and its platens are fully manufactured in our facilities by experienced mechanics and technicians, who place emphasis on the quality of production and take under consideration both the hygiene and employee safety requirements and the environmental protection requirements as these are set forth by the Council of the European Communities and by the Greek legislation (CE) (PD 377). This declaration becomes invalid if any changes occur to the press without our authorization.

 

Compliance with EC Directives:

• EC Machinery Directive (89/392/EEC) along with its amendments 91/368/EEC, 93/44/EEC and 93/68/EEC
• EC Directive of Electromagnetic Compatibility (89/336/EEC) along with its amendment 92/31/EEC
• EC Low Voltage Directive (73/23/EEC)

Compliance with international standards:

• EN 292.01-92, EN 292.02-92, EN 294-92, EN 349-93, EN 23741-92, EN 23742-92, EN 60204.01-93

Compliance with national standards:

• ELOT 509-88

Technical specifications

Double air heat multi-press suitable
   for the fitting of platens

Α-15 for small flat surfaces with dimensions 15x15cm.
Α-Α4 for flat surfaces of a size of ISO Α4 or 30x21cm.
   (Horizontal or vertical layout)
Α-C for caps
 

Digital controller for the measurement of
   time and temperature

Temperature between 0o-240o C.
2 independent times between 0-999 secs for each
   working station.

• Meter of the daily production output

• Meter of the total production output of
   the press during its lifespan.


• Temperature fluctuation on the surface +/-2ο C

• Maximum power of the heated surface 1150 W

• Power supply: 230V AC, 50Hz, 6A

• Air pressure: 6 bar

• Operators 1

• CE

• Dimensions: 53x51x65 cm (without the platens)

• Net weight: 38.5kg (without the platens)

 
 

Special characteristics per platen type:


AM2-C

• Power of the heated surface: 500W
• One AM2-C set consists of: 5 pcs
• Silicone sheet: 2 pcs
• External dimensions with the AM2-C platens: 63x56x65 cm
• Net weight of the mug platen: 5.5 Kg

AM2-A4 (vertical platen) & A4 (horizontal platen)

• Power of the heated surface: 1150 W
• Max. dimensions of the printing surface: 30*21 cm
• One AM2-Α4 set consists of: 3pcs
• Silicone sheet: 2pcs
• External dimensions with vertical AM2-A4 platens: 62x54x65mm
• External dimensions with horizontal M2-A4o platens: 70x59x65cm
• Net weight of the mug platen: 11.1kg

AM2-15

• Power of the heated surface: 500 W
• Max dimensions of the printing surface: 15x15 cm
• One AM2-15 set consists of: 3 pcs
• Silicone sheet: 2 pcs
• External dimensions with the AM2-15 platens: 63*56*65 cm
• Net weight of the mug platen: 7.2 Kg
 

Warranty

Double air heat multi press M2-A with a 12-month warranty which is in effect from the date of purchase of the product. The press M2-A is accompanied by a manual, it’s wiring diagrams and list of the spare parts of the machine and its platens.
Our company guarantees the proper function of the press and is obliged to service or repair any faulty part which exhibits a manufacturing defect within the 12month period of the warranty. The repair and spare parts costs burden the manufacturer. The transportation cost from and to our company's seat, the insurance premiums and any other expenses, which may arise during the transportation of the product always burden the buyer.
This warranty will no longer be valid if:

• The machine was used for a different purpose than the one it is intended for.
• Damages were caused due to an accident, a fall, or due to the improper handling of the machine.
• A repair attempt by the user or by a third party preceded.
• An accessory or a spare part of the machine was modified for any reason.
• The installation, use and maintenance of the machine was not carried out in accordance with the instructions of this manual.
• A consumable or a spare part used is different than the ones that were originally included in the machine.



HEAD OFFICE
174 K. Karamanlis avenue,
Postcode. GR-54248
Thessaloniki, Greece
t. +30 2310 311777
f. +30 2310 322784
This email address is being protected from spambots. You need JavaScript enabled to view it.

FACTORY
4th road Industrial Park,
Lakkoma, Chalkidiki
Postcode. GR-63080
t. +34 2399051432
f. +34 2399051433 
This email address is being protected from spambots. You need JavaScript enabled to view it.

Follow us on social media

Ask a question
1000 characters left