manually operated heat multi-press NP-2K

General Description
The manually operated heat multi-press NP-2K prints on ready-made clothes, caps and mugs. It is a flexible press that allows its operator to quickly switch printing platens.
The platens that can be used in the heat multi-press NP-2K are the following:
• Α-ΜΜS for standardized mugs of 330ml.
• Α-15 for small flat surfaces with dimensions 15x15cm.
• Α-Α4 for flat surfaces of a size of ISO Α4 or 30x21cm.
(Horizontal or vertical layout)
• Α-C for caps
The pressing time and the resistance temperature are controlled through a digital controller that calculates the daily production output and the total production output of the press during its lifespan. The application pressure of the press increases and decreases depending on the operator's requirements with the use of a mechanism that is placed on the bottom part of the platen. Our company guarantees the proper allocation of pressure and heat on the whole surface of the platen.
The manually operated heat multi-press NP-2K is a very good choice for companies with small to medium scale production.
The NP-2K and its platens are fully manufactured in our facilities by experienced mechanics and technicians, who place emphasis on the quality of production and take under consideration both the hygiene and employee safety requirements and the environmental protection requirements as these are set forth by the Council of the European Communities and by the Greek legislation (CE) (PD 377). This declaration becomes invalid if any changes occur to the press without our authorization.
Compliance with EC Directives:
• EC Directive of Electromagnetic Compatibility (89/336/EEC) along with its amendment 92/31/EEC
• EC Low Voltage Directive (73/23/EEC)
Compliance with international standards:
• EN 292.01-92, EN 292.02-92, EN 294-92, EN 349-93, EN 23741-92, EN 23742-92, EN 60204.01-93
Compliance with national standards:
• ELOT 509-88
Technical specifications
• Manually operated multi-press suitable
for the fitting of platens:
• Digital controller for the measurement of time
and temperature
• Temperature fluctuation on the surface: +/- 2ο C
• Maximum power of the heated surface: 1150 W
• Power supply: 230V AC, 50Hz, 6A
• Operators: 1
• CE
• Net weight: 10.250 kg(without platens)
Accessories - Options NP-2K

Α-15
• Power of the heated surface: 500W
• Dimensions of the printing surface: 15*15cm
• Silicone sheet: 1 pc
• One A-15 set consists of: 2 pcs
• External dimensions with platens: 52χ29χ36 cm
• Net weight of a 15 x 15cm platen: 4.6 Kg

Α-Α4
• Power of the heated surface: 1100W
• Dimensions of the printing surface: 30x21cm
• Silicone sheet: 1 pc
• One A-A4 set consists of: 2 pcs
• External dimensions with platens: 57.5*29.5*36 cm
• Net weight of an A4 or 30x21cm platen: 7.5 Kg

Α-ΜΜS
• Power of the heated surface: 320W
• Dimensions of the printing surface:Φ80mm –330ml
• One A-MMS set consists of: 1 pc
• External dimensions with platens: 52*29*36 cm
• Net weight of the mug platen: 1.5 Kg

Α-C
• Power of the heated surface: 500W
• One A-C set consists of: 3 pcs
• Silicone sheet: 1 pc
• External dimensions with platens: 52*29*36 cm
• Net weight of the cap platen: 4.25 Kg
Warranty
The manually operated heat multi press NP-2Κ has a 12-month warranty which is in effect from the date of purchase of the machine. The multi-press NΡ-2K is accompanied by a manual, it’s wiring diagrams and list of the spare parts of the machine and its platens
Our company guarantees the proper function of the machine and is obliged to service or repair any faulty part which exhibits a manufacturing defect within the period of the 12-month warranty. The repair and spare parts costs burden the manufacturer. The transportation cost from and to our company's seat, the insurance premiums and any other expenses, which may arise during the transportation of the product always burden the buyer.
This warranty will no longer be valid if:
• The machine was used for a different purpose than the one it is intended for.
• Damages were caused due to an accident, a fall, or due to the improper handling of the machine.
• A repair attempt by the user or by a third party preceded.
• An accessory or a spare part of the machine was modified for any reason.
• The installation, use and maintenance of the machine was not carried out in accordance with the instructions of this manual.
• A consumable or a spare part used is different than the ones that were originally included in the machine.